Cutting all the layers for the arms. Then glueing the spacers on to separate the layers from each other. Without the spacer the angle of the thread will be too steep, so I think there is a chance that when it is stretched the layers will group together instead of spreading out evenly.
Then cutting the brass tube into 3.6 - 4mm ish length and gluing it onto the layer. When this is done the layers can be grouped together ranging from 0 - 20.
The tube cutter adds a bevel to the edge so each layer also needs to be drilled open again. In hindsight i realized that the sanding machine would've made this much easier and quicker.
Process for the arms.
No comments:
Post a Comment